Petition to President of India on Amarnath shrine land gets great response
Submitted by editor on Sat, 08/23/2008 - 15:23
D Y Vyas
There is a online petition on Amarnath Shrine Land issue, which is getting an amazing response. It has achieved over 5850 sigantories, and rising.
It says:
"It is a matter of great shame for the nation which calls itself secular, that a land of about 800 acres can not be given for construction of temporary sheds for the Amarnath pilgrims at Baltal in Kashmir province of Jammu and Kashmir state. The political leaders of valley have been exploiting the issue just to fulfill their political motives and have been playing with the beliefs of millions of Hindu's living in and outside India.
We would like to bring a fact to your notice that The Forest Minister in the Cabinet was from the PDP, a coalition partner in the government. Yet they (the PDP) refused to accept responsibility for the joint decision (of allocating forest land to set up temporary structures for facilities for Hindu pilgrims during the Amarnath Yatra). The PDP (which is led by Mufti Mohammad Sayeed) played electoral politics of the lowest kind by hitching its voice to the Hurriyat objections, and pulled out of the government And above that Mr. Ghulam Nabi Azad (who held the post of Chief Minister) revoked the land order back while his government was in minority.
Moreover, when Islamia Univ was to be constructed at Rajouri and Kashmir, the state govt gave them forest land and that too free of cost. But the Amarnath Trust was told to pay 2.5 crores of rupees for constructing temporary sheds during the months of Yatra.
Respected madam, we would like to put another fact in front of you that the city of Jammu has been burning since last one month. The JKP (Jammu & Kashmir Police) has been continuously beating up peaceful protesters and killed two of them by opening firing on a procession. I request you to take necessary steps so that peace be restored in this state and land be given back to the Amarnath Trust.
We request the leadership of our nation to intervene into the matter and stop appeasing the handful population of Kashmir at the expense of beliefs of the whole nation."
It is available at:
http://www.petitiononline.com/Amarnath/petition.html
Simptronik Technologies Offers Portable, Ultra Low Jitter Pulse
Simptronik’s ULJ series pulse pattern generators are the only handheld pulse pattern generators with output frequency up to 1.5GHz and less than 0.5ps output jitter. Other advanced features include differential data and clock output channels, wide frequency range, high frequency resolution, wide output amplitude range and flexible triggering. Its output data format is very flexible with built-in PRBS data patterns, 32-bit or 4K-bit custom data patterns. The large, touch panel, LCD screen is part of its friendly user interface. All these features are packed in a tiny yet solid aluminum package weighting less than 1Kg.
Traditional high-performance pulse pattern generators are bulky, expensive and hard to use. Simptronik Technologies took a drastically new approach to high-performance pulse pattern generators. Don’t be deceived by its slick and compact appearance. It is packed with advanced features and performance surpassing much bigger and more expensive pulse generators. Its <0.5ps output jitter sets it apart immediately. No other model of the same class comes close. Its output frequencies cover a wide range from 2MHz to 1.5GHz. Topping it off with a 0.1V to 3.0V (0.2V-6.0V differential) output amplitude and up to 2.5V offset adjustment, Simptronik makes their ULJ series ideal candidates for reference clock source and data source for high-speed, high-performance transceiver testing. If you need more flexibility, you will love the build-in PRBS (PRBS7, 10, 15, 23, 31) data patterns, user-defined data patterns and delay adjustments between clock and data channels. External triggering and trigger output are also part of the package. All these features are made accessible through a friendly, large, touch-screen user interface.
Modern high-speed circuits, such as PLL, transceivers and wireless IC, require the most stable clock and data source for characterization and testing. Simptronik’s ULJ series pulse generators not only have the best characteristics as clock and data sources, their compact form factors offer the unique solution for technology demonstration on the go. The era of pulling around bulking pulse generators is over. All Simptronik products are backed by standard one-year warranty extendable to three years.
For cost sensitive users, Simptronik offers the “A” series with the best cost, performance ratio. These models are equipped with the same features as the ULJ models except lower output frequency, higher output jitter and less frequency accuracy. They are ideal for general digital testing, clock and data sources. You won’t be short of pulse generators anymore.
Model line-up:
SK-1500ULJ: 2MHz to 1.5GHz, less than 0.5ps rms output jitter.
SK-1000ULJ: 2MHz to 1.0GHz, less than 0.5ps rms output jitter.
SK- 1000A: 2MHz to 1.0GHz, less than 13ps rms output jitter.
SK- 660A: 2MHz to 660MHz, less than 16ps rms output jitter.
Simptronik Technologies Offers Portable, Ultra Low Jitter Pulse
Simptronik’s ULJ series pulse pattern generators are the only handheld pulse pattern generators with output frequency up to 1.5GHz and less than 0.5ps output jitter. Other advanced features include differential data and clock output channels, wide frequency range, high frequency resolution, wide output amplitude range and flexible triggering. Its output data format is very flexible with built-in PRBS data patterns, 32-bit or 4K-bit custom data patterns. The large, touch panel, LCD screen is part of its friendly user interface. All these features are packed in a tiny yet solid aluminum package weighting less than 1Kg.
Traditional high-performance pulse pattern generators are bulky, expensive and hard to use. Simptronik Technologies took a drastically new approach to high-performance pulse pattern generators. Don’t be deceived by its slick and compact appearance. It is packed with advanced features and performance surpassing much bigger and more expensive pulse generators. Its <0.5ps output jitter sets it apart immediately. No other model of the same class comes close. Its output frequencies cover a wide range from 2MHz to 1.5GHz. Topping it off with a 0.1V to 3.0V (0.2V-6.0V differential) output amplitude and up to 2.5V offset adjustment, Simptronik makes their ULJ series ideal candidates for reference clock source and data source for high-speed, high-performance transceiver testing. If you need more flexibility, you will love the build-in PRBS (PRBS7, 10, 15, 23, 31) data patterns, user-defined data patterns and delay adjustments between clock and data channels. External triggering and trigger output are also part of the package. All these features are made accessible through a friendly, large, touch-screen user interface.
Modern high-speed circuits, such as PLL, transceivers and wireless IC, require the most stable clock and data source for characterization and testing. Simptronik’s ULJ series pulse generators not only have the best characteristics as clock and data sources, their compact form factors offer the unique solution for technology demonstration on the go. The era of pulling around bulking pulse generators is over. All Simptronik products are backed by standard one-year warranty extendable to three years.
For cost sensitive users, Simptronik offers the “A” series with the best cost, performance ratio. These models are equipped with the same features as the ULJ models except lower output frequency, higher output jitter and less frequency accuracy. They are ideal for general digital testing, clock and data sources. You won’t be short of pulse generators anymore.
Simptronik Technologies Offers Portable, Ultra Low Jitter Pulse
Simptronik’s ULJ series pulse pattern generators are the only handheld pulse pattern generators with output frequency up to 1.5GHz and less than 0.5ps output jitter. Other advanced features include differential data and clock output channels, wide frequency range, high frequency resolution, wide output amplitude range and flexible triggering. Its output data format is very flexible with built-in PRBS data patterns, 32-bit or 4K-bit custom data patterns. The large, touch panel, LCD screen is part of its friendly user interface. All these features are packed in a tiny yet solid aluminum package weighting less than 1Kg.
Traditional high-performance pulse pattern generators are bulky, expensive and hard to use. Simptronik Technologies took a drastically new approach to high-performance pulse pattern generators. Don’t be deceived by its slick and compact appearance. It is packed with advanced features and performance surpassing much bigger and more expensive pulse generators. Its <0.5ps output jitter sets it apart immediately. No other model of the same class comes close. Its output frequencies cover a wide range from 2MHz to 1.5GHz. Topping it off with a 0.1V to 3.0V (0.2V-6.0V differential) output amplitude and up to 2.5V offset adjustment, Simptronik makes their ULJ series ideal candidates for reference clock source and data source for high-speed, high-performance transceiver testing. If you need more flexibility, you will love the build-in PRBS (PRBS7, 10, 15, 23, 31) data patterns, user-defined data patterns and delay adjustments between clock and data channels. External triggering and trigger output are also part of the package. All these features are made accessible through a friendly, large, touch-screen user interface.
Modern high-speed circuits, such as PLL, transceivers and wireless IC, require the most stable clock and data source for characterization and testing. Simptronik’s ULJ series pulse generators not only have the best characteristics as clock and data sources, their compact form factors offer the unique solution for technology demonstration on the go. The era of pulling around bulking pulse generators is over. All Simptronik products are backed by standard one-year warranty extendable to three years.
For cost sensitive users, Simptronik offers the “A” series with the best cost, performance ratio. These models are equipped with the same features as the ULJ models except lower output frequency, higher output jitter and less frequency accuracy. They are ideal for general digital testing, clock and data sources. You won’t be short of pulse generators anymore.
Simptronik Technologies Offers Portable, Ultra Low Jitter Pulse
Simptronik’s ULJ series pulse pattern generators are the only handheld pulse pattern generators with output frequency up to 1.5GHz and less than 0.5ps output jitter. Other advanced features include differential data and clock output channels, wide frequency range, high frequency resolution, wide output amplitude range and flexible triggering. Its output data format is very flexible with built-in PRBS data patterns, 32-bit or 4K-bit custom data patterns. The large, touch panel, LCD screen is part of its friendly user interface. All these features are packed in a tiny yet solid aluminum package weighting less than 1Kg.
Traditional high-performance pulse pattern generators are bulky, expensive and hard to use. Simptronik Technologies took a drastically new approach to high-performance pulse pattern generators. Don’t be deceived by its slick and compact appearance. It is packed with advanced features and performance surpassing much bigger and more expensive pulse generators. Its <0.5ps output jitter sets it apart immediately. No other model of the same class comes close. Its output frequencies cover a wide range from 2MHz to 1.5GHz. Topping it off with a 0.1V to 3.0V (0.2V-6.0V differential) output amplitude and up to 2.5V offset adjustment, Simptronik makes their ULJ series ideal candidates for reference clock source and data source for high-speed, high-performance transceiver testing. If you need more flexibility, you will love the build-in PRBS (PRBS7, 10, 15, 23, 31) data patterns, user-defined data patterns and delay adjustments between clock and data channels. External triggering and trigger output are also part of the package. All these features are made accessible through a friendly, large, touch-screen user interface.
Modern high-speed circuits, such as PLL, transceivers and wireless IC, require the most stable clock and data source for characterization and testing. Simptronik’s ULJ series pulse generators not only have the best characteristics as clock and data sources, their compact form factors offer the unique solution for technology demonstration on the go. The era of pulling around bulking pulse generators is over. All Simptronik products are backed by standard one-year warranty extendable to three years.
For cost sensitive users, Simptronik offers the “A” series with the best cost, performance ratio. These models are equipped with the same features as the ULJ models except lower output frequency, higher output jitter and less frequency accuracy. They are ideal for general digital testing, clock and data sources. You won’t be short of pulse generators anymore.
Simptronik Technologies Offers Portable, Ultra Low Jitter Pulse
Simptronik’s ULJ series pulse pattern generators are the only handheld pulse pattern generators with output frequency up to 1.5GHz and less than 0.5ps output jitter. Other advanced features include differential data and clock output channels, wide frequency range, high frequency resolution, wide output amplitude range and flexible triggering. Its output data format is very flexible with built-in PRBS data patterns, 32-bit or 4K-bit custom data patterns. The large, touch panel, LCD screen is part of its friendly user interface. All these features are packed in a tiny yet solid aluminum package weighting less than 1Kg.
Traditional high-performance pulse pattern generators are bulky, expensive and hard to use. Simptronik Technologies took a drastically new approach to high-performance pulse pattern generators. Don’t be deceived by its slick and compact appearance. It is packed with advanced features and performance surpassing much bigger and more expensive pulse generators. Its <0.5ps output jitter sets it apart immediately. No other model of the same class comes close. Its output frequencies cover a wide range from 2MHz to 1.5GHz. Topping it off with a 0.1V to 3.0V (0.2V-6.0V differential) output amplitude and up to 2.5V offset adjustment, Simptronik makes their ULJ series ideal candidates for reference clock source and data source for high-speed, high-performance transceiver testing. If you need more flexibility, you will love the build-in PRBS (PRBS7, 10, 15, 23, 31) data patterns, user-defined data patterns and delay adjustments between clock and data channels. External triggering and trigger output are also part of the package. All these features are made accessible through a friendly, large, touch-screen user interface.
Modern high-speed circuits, such as PLL, transceivers and wireless IC, require the most stable clock and data source for characterization and testing. Simptronik’s ULJ series pulse generators not only have the best characteristics as clock and data sources, their compact form factors offer the unique solution for technology demonstration on the go. The era of pulling around bulking pulse generators is over. All Simptronik products are backed by standard one-year warranty extendable to three years.
For cost sensitive users, Simptronik offers the “A” series with the best cost, performance ratio. These models are equipped with the same features as the ULJ models except lower output frequency, higher output jitter and less frequency accuracy. They are ideal for general digital testing, clock and data sources. You won’t be short of pulse generators anymore.
Model line-up:
SK-1500ULJ: 2MHz to 1.5GHz, less than 0.5ps rms output jitter.
SK-1000ULJ: 2MHz to 1.0GHz, less than 0.5ps rms output jitter.
SK- 1000A: 2MHz to 1.0GHz, less than 13ps rms output jitter.
SK- 660A: 2MHz to 660MHz, less than 16ps rms output jitter.